Wet Areas

Aquafin 2K/M  
  Flexible two component, waterproofing coating
External waterproofing of old and new buildings against ground moisture, humidity, pressure water. Horizontal waterproofing beneath masonry. Internal waterproofing against humidity outside.
 
 ◄  Roofing Membranes
 ◄  Roof & Deck Membrane
 ◄  Pedestrian & Trafficable

 

   

Datasheet  MSDS

 
 ◄  Wet Areas
 ◄  Waterproof Coatings Chevaline Dexx
 
 ◄  Tanking Systems Flexible reinforced roof & deck membrane
A liquid applied, glass-fibre mat reinforced membrane for use in sealing old and new flat and near-flat roofs, walk-out decks and patios. Particularly useful where areas are subject to foot traffic and light vehicular traffic. Topcoats are available for various service conditions.
 
 ◄  Concrete Treatment
 ◄  Sealants
       

Datasheet MSDS

 
 

 

Tex-tile AFM  
Anti-fracture Membrane
Used under ceramic tiles or thin pavers laid in a thin-bed adhesive in both wet and dry areas. In wet areas, Tex-tile AFM acts as a waterproofing membrane, whilst in dry area applications, Tex-tile AFM acts as an anti-fracture membrane, inhibiting reflection of substrate cracks or joints through tiled surfaces.
 
     

Datasheet  MSDS

 

Tremco Vulkem Non-Exposed Membrane  
 One part urethane waterproofing membrane
A single pack elastomeric, moisture curing high tensile strength and tough curing polyurethane membrane. It cures to form a rubber membrane surface that provides watertight substrates. For wet areas, laundries, roof terraces, kitchens, decks, concrete substrate plazas, balconies, shower recesses.
 
 

 

   

Datasheet MSDS

 
   

© 2006 All information contained in this site is copyrighted to Equus Industries Ltd.