Tanking Systems & Tank Linings

Paraseal LG  
  HDPE/Bentonite sheet membrane waterproofing system
Paraseal LG is especially effective when waterproofing from the blindside (lagging, etc.) where the waterproofing membrane is applied before the walls or floor are poured. It is designed to resist damage from multiple exposure to inclement weather, extremely abrasive concrete pours or direct installation of shotcrete. Paraseal LG will also exhibit outstanding protection against water intrusion in areas of high water heads. Its special weather treatment allows Paraseal LG to be installed over relatively long periods of time before the walls are poured.
 
   Roofing Membranes
 ◄  Roof & Deck Membrane
 ◄  Pedestrian & Trafficable
 ◄  Wet Areas 
 ◄  Waterproof Coatings

 

   

Datasheet MSDS

 
 ◄  Tanking Systems
 ◄  Concrete Treatment Saltwater Paraseal
 
   Sealants HDPE/Bentonite sheet membrane. Saline condition dual waterproofing system
Saltwater Paraseal is used to waterproof structures above and below grade in saltwater conditions. It is excellent for use on split slabs, parking decks, poured and block foundations and vertical walls. it has outstanding performance when used under conditions of high water head and installed prior to concrete pour such as retaining walls, elevator pits etc.
 
 
 
 
 

 

   

Datasheet MSDS

 
 

 

Debobase 3.5 Special  
For waterproofing of underground structures and screed protected areas in construction. Especially designed to resist underground soil settlement in basement, tunnels, underpasses, and retaining wall construction.
 

 

   

Datasheet MSDS

 

Tremproof 3000  
 APP modified torch applied membrane
Unique formulation, suitable for both high and low temperature service. High strength minimising risk of site damage. Resistant to hydrostatic pressure (up to 12m head of water) when correctly applied. Easy to apply in tight areas such as corners and penetrations. Used for retaining walls, plaza decks, balconies, terraces, planter boxes, etc.
 
 
 

 

   

Datasheet  |  MSDS

 
 
  Debovix 3T/F K180  
  SBS torch-on waterproofing membrane 
Torch on waterproofing membrane for underground structures consisting of a mixture of penetration bitumen, modified with synthetic rubbers of the SBS type.
 
 
 

 

   

Datasheet  |  MSDS

 
 
  Aquasel 2001 AD

 

  Waterproofing membrane system
Designed for use on concrete structures to provide immediate and positive protection and waterproofing. This includes below grade foundation walls, slabs, parking decks, plazas, tunnels, and highway bridges.
 
 
 

 

   

Datasheet MSDS

 
 
  Tremco Tremproof 60  
  Bitumen modified moisture curing polyurethane membrane
A single component, bitumen modified, moisture curing polyurethane fluid applied waterproofing membrane for roofs, tunnels, terraces, balconies, plaza decks, planter boxes, retaining walls, internal wet areas, fountains and pools.
 
 
 

 

   

Datasheet MSDS

 
 
  Traxx 2000  
  Elastomeric roof and deck membrane
A liquid applied trafficable elastomeric membrane for use as both a reinforced and unreinforced exterior/interior waterproof system on roofs, decks, pool surrounds and walkways. Is topcoated with Traxx 2000 Wearcoat (smooth or non-skid) for maximum exterior durability.
 
 
 

 

   

Datasheet MSDS

 
 
  Traxx CS Membrane System  
 

An elastomeric membrane for use in areas where a coloured waterproofing membrane is required, and as a flexible tank lining for potable water supplies. Can be used as a resilient, impact absorbing wall coating and as a roofing or protective membrane on external surfaces, in conjunction with appropriate protective topcoats.
 

 
 

 

   

Datasheet MSDS

 
 
  Matacryl Manual  
  A highly elastic heavy duty manually applied 100% seamless waterproofing membrane
A medium viscosity, urethane-modified, pre-reacted 100% solid membrane system based on acrylic monomers. The cured product is a very flexible crack-bridging membrane that retains it flexibility and crack-bridging performance.
 
 
 

 

   

Datasheet MSDS

 
   

© 2006 All information contained in this site is copyrighted to Equus Industries Ltd.